MiniGASS 1220 气体采样系统

mg-1220

 更多信息:

Mini-GASS™ 系统为高性能气体分析准备热样气流。

  • 12″w x 20″h x 7″d 纤维玻璃外壳w/透明遮罩
  • 1/4″ 入口压紧接头
  • 热缩管加热采样管入口
  • 数字显示PID 温度控制器
  • 吹扫气体流量计，压力调节器和压力计
  • 防腐蚀絮凝过滤器，带硼硅玻璃外壳的2.5″ 直径外壳; 聚四氟乙烯粘结剂1µm绝对孔隙度硼硅纤维过滤元件
  • NEMA-4X 级
  • CE Mark 认证

MG-1220 低成本Mini－GASS系统，包含样气过滤器，Nafion管，温度和吹扫控制，安全链锁和选型性无热干燥管。part-numbers-mg-1220-series

1 – 电压
115 VAC, 50/60 Hz 1A
230 VAC, 50 Hz 2A
2 – 涂层材料 / 入口类型 
Fluorocarbon, H.L. Seal, Top Inlet F2
Fluorocarbon 3/8″ Bulkhead,Top Inlet F4
Fluorocarbon, H.L. Seal, Left Inlet F5
Fluorocarbon 3/8″Bulkhead,Left Inlet F6
316SS, H.L. Seal, Top Inlet S2
316SS, 3/8″ Bulkhead,Top Inlet S4
316SS, H.L. Seal, Left Inlet S5
316SS, 3/8″Bulkhead,Left Inlet S6
3 – 过滤器排水口
Manual drain valve assembly, for vacuum drain, includes a Teflon eductor with 0.040″ Teflon nozzle and a Polypropylene check valve to prevent backflow V
Manual drain valve assembly, for pressure drain (not available in Kynar), includes a Toggle valve to manually drain coalesced liquids P
4 – 干燥管(要求选项)
50 tube Nafion gas dryer, 24″ long, Small dryer for LOW sample flow rates (1 lpm or less) 05
100 tube Nafion gas dryer, 24″ long;  Medium dryer for MODERATE sample flow rates (2-3 lpm)  10
 200 tube Nafion gas dryer, 24″ long; Large dryer for HIGH sample flow rates (4-6 lpm) 20
No Dryer Installed N1
No Dryer, No Purge Panel N2
5 – 除氨器
Required when sample contains moderate levels of ammonia; Eliminates deposition of ammonium salts in dryer and sample lines AS
6 – Z-吹扫
Meets class 1, Division 2 requirements for hazardous areas Z

博纯MiniGASS 1220 推荐附件:

ITEM # Mini-GASS 探头系统推荐部件
4P-STG4 18″, 316L stainless steel, 1/2″, schedule 40
4P-STG4-2 2-foot, 316L stainless steel, 1/2″, schedule 40
4P-STG4-3 3-foot, 316L stainless steel, 1/2″, schedule 40
4P-STG4-4 4-foot, 316L stainless steel, 1/2″, schedule 40
4P-STG4-5 5-foot, 316L stainless steel, 1/2″, schedule 40
4P-STG8 18″, 316L stainless steel, 1/2″, schedule 80
4P-STG8-2 2-foot, 316L stainless steel, 1/2″, schedule 80
4P-STG8-3 3-foot, 316L stainless steel, 1/2″, schedule 80
4P-STG8-4 4-foot, 316L stainless steel, 1/2″, schedule 80
4P-STG8-5 5-foot, 316L stainless steel, 1/2″, schedule 80
4P-STGH 18″, Hastelloy C276, 1/2″, schedule 80
4P-STGH-2 2-foot, Hastelloy C276, 1/2″, schedule 80
4P-STGH-3 3-foot, Hastelloy C276, 1/2″, schedule 80
4P-STGH-4 4-foot, Hastelloy C276, 1/2″, schedule 80
4P-STGH-5 5-foot, Hastelloy C276, 1/2″, schedule 80

博纯MiniGASS 1220 备品备件:

ITEM # 描述
MG-DTC Digital temperature controller, single channel
MG-TCS Thermocouple
MG-SSR Solid state relay
MG-FM Flow meter, purge gas (0-60 L/min)
MG-PR Pressure regulator, purge gas or eductor
MG-DPS Differential pressure switch
MG-PG-0-30 Pressure gage, purge gas (0-30 PSI)
MG-VG-0-60 Vacuum gage, purge eductor (0-30″Hg)
SV-K10 Safety interlock solenoid valve, Kynar, 110V/60Hz
SV-K20 Safety interlock solenoid valve, Kynar, 220V/50Hz
FF-DCV Drain check valve, Teflon, for vacuum drain
DVV-B10 Drain solenoid valve, brass, for vacuum drain 110V/60Hz
DVV-B20 Drain solenoid valve, brass, for vacuum drain 220V/50Hz
DVP-K10 Drain solenoid valve, Kynar, for pressure drain 110V/60Hz
DVP-K20 Drain solenoid valve, Kynar, for pressure drain 220V/50Hz
MG-DVT Drain valve timer
MG-DC Mounting clamps for dryer (specify dryer model)
MG-HB200T Heater blocks for PD-200T, 1 pair
MG-1412-HB Backplate with heater for enclosure 1412
MG-2112-HB Backplate with heater for enclosure 2112
PD-50T-24E 50 tube dryer replacement element, 24″ long, includes o-rings
PD-100T-24E 100 tube dryer replacement element, 24″ long, includes o-rings
PD-200T-24E 200 tube dryer replacement element, 24″ long, includes o-rings
FF-250-E-2.5G Replacement filter element
FF-250-G Replacement glass shell
FF-250-3 Replacement o-ring set, set of 3
AS-200-08-EB Media replacement for ammonia scrubber, bulk supply, 5 fillings
MG-PUMPKIT Pump repair kit, Teflon diaphragm