Baldwin 5210 经典系列热电采样冷凝器
|
|
更多信息:
附件信息:
|
博纯公司的Baldwin-Series Classic 系列5210型热电冷凝器专门设计用于高室温及高湿度应用，同时适用于单气路或双气路应用。5210型产品具有特大号的散热片及高性能热电装置，能够实现大量排热的 效果。Baldwin-系列热电冷凝器所采用的散热片均由传热系数较高的挤出铝板（端面厚度3/4英寸）制成。5210型产品采用一种特殊的控制器，可 以在高达110°F (43°C)室温环境下工作。
性能:
- 3-8 lpm (6.4-17scfh); 440 Btu/Hr
- 单通道系统
- (1) 主动式, (1) 被动式热交换器, 仅在10″长度的系列中 (下方选择材料)
- LED温度显示
- 100-120 VAC/ or 200-240 VAC, 50/60 Hz voltages
- 14.6″ x 11″ x 10.6″; 27 lbs
- 需要双头蠕动泵排水泵，但未包含
- 水滑和报警继电器板
- CE 认证
5210 系列冷凝器规格：
| 样气流量范围 |
Up to 8 LPM Up to 17 SCFH |
| 额定流量条件下的平均入口露点 |
20% H2O (60°C DP) @ 5 LPM |
| 尺寸 |
14.55 x 11.12 x 10.57 in. HWD – 37 x 28 x 26.5 cm |
| 重量 |
27 lbs – 12 kg |
| 最大入口样气温度 |
400°F (205°C) SS, glass impingers 280°F (138°C) Kynar impingers |
| 最大入口压力 |
15 psig – 1 bar |
| 最大热交换器压降 |
+1 in H2O |
| 室温范围 |
33-110°F – 0.6-43°C |
| 出口样气露点 |
41°F – 5°C |
| 入口管连接 |
3/8 in. compression |
| 出口管连接 |
1/4 in. compression |
| 排水管连接 |
1/4 in. barb |
| 电压 |
115/230 VAC – 50/60 Hz |
| 电源功率 |
250 Watts |
| 开始时间 |
小于 3 minutes |
5210 系列冷凝器智能产品编号系统：
1 – 电压
|
|
| 115 VAC, 50/60 Hz |
1A |
| 230 VAC, 50 Hz |
2A |
2 – 热交换器 (要求选项)
|
|
| (2) 10″ Stainless Steel, EZ Clean Twist-Apart Impingers |
ES |
| (2) 10″ Glass Impingers, threaded with fittings |
G |
| (2) 10″ Kynar Impingers |
K |
| (2) 10″ Stainless-Durinert coated, EZ Clean Twist-Apart Impingers |
ED |
|
3 – NJ 热电偶
|
|
| 仅不锈钢热交换器 |
|
| New Jersey thermocouple temperature sensor; lead wires only |
NJ |
4- 水滑传感器
|
|
| Water slip sensor with inline flow holder; 1/4″ Kynar tube fittings |
WS |
|
Baldwin 5210 系列冷凝器推荐附件：
| ITEM # |
描述 |
| 3KPB-003 |
Peristaltic pump, dual head, 115 VAC, complete with enclosure |
| 3KPB-004 |
Peristaltic pump, dual head, 230 VAC, complete with enclosure |
Baldwin 5210 系列冷凝器备件：
| ITEM # |
描述 |
| 3KPB-000 |
Pump Peristaltic, No Heads |
| 2PBM-001 |
Peristaltic pump, motor only, 115 VAC 60 Hz |
| 2PBM-002 |
Peristaltic pump, motor only, 230 VAC 50 Hz |
| 2PBM-003 |
Peristaltic pump, head only, standard |
| 2PBT-002PK |
Peristaltic pump, tubing, norprene, size 17 (10 feet) |
| 2PBM-006 |
Dual head hardware kit |
| 3CXD-022 |
Impinger, 10″ EZ-Clean twist-apart, SS Durinert+ coated |
| 3CXD-024 |
Impinger, 10″ NJ, EZ-Clean twist-apart, SS Durinert+ coated |
| 3CXG-002 |
Impinger, 10″ glass, threaded with fittings |
| 3CXK-003 |
Impinger, 10″ Kynar |
| 3CXS-022 |
Impinger, 10″ SS, EZ-Clean twist-apart |
| 3CXS-024 |
Impinger, 10″ NJ, EZ-Clean twist-apart, SS |
| 0PTC-003 |
Paste,Thermal,Compound,2 Oz.Tube |
| 3CCB-010 |
Control board, single channel |
| 3CCB-004 |
Relay board, single channel |
| 1PSD-035 |
Power supply, 600 W, 15VDC |
| 2FAN-005 |
Fan, muffin, 4″ x 1″, 12VDC |
| 2FAN-004 |
Fan, muffin, 4″ x 1-1/2″, 12VDC |
| 3KPE-004 |
Peltier element kit, 40 mm, single TE |
| 1TTC-001 |
Thermocouple, temperature control, type K, 24″ |
| 3CWS-001 |
Water slip sensor only with 18″ lead and male connector |
| 3KCW-002 |
Water Slip Sensor w/conn. |
| 0PTC-003 |
Paste,Thermal,Compound,2 Oz.Tube |
| 4C-NJ/K |
NJ Thermocouple Retrofit; for 1 Impinger |
