Baldwin iCool 系列OEM热电冷凝器
|
|
更多信息:
附件信息: |
对燃烧样气和过程控制流进行精确分析时，在要求除去样气中水分的同时还要保留所需分析的气体成分。新型集成系统热电冷凝器可以很好地降低样气中的水分至可重复实现的4°C (39°F)稳定露点。集成商系列冷凝器产品在敏感测量中去除水分干扰，防治水在过滤器，泵和采样管线中的冷凝。最重要的是，这些冷凝器可以去除夹带的小液滴防治造成设备损坏，从而保护了昂贵的分析仪。
性能:
- 1-4 lpm (2.2 – 6.4 scfh); 58 Btu/Hr; 基于12% 入口水气
- 单通道或双通道
- (1) 5″ 主动冲击式采样探头 (在下方选择材质) plus 5″ 可选性被动冲击式采样探头
- LCD 显示用于温度和设定值
- LED 显示 “ready就绪” or “fail失败”
- 90-240 VAC, 50/60 Hz, 自动感应
- 7.25″ x 8.25″ x 10.25″ (18.5 cm x 21 cm x 26.7 cm); 11 lbs
- 不适用于高温环境应用，必须安装在空调仓内
- 需要单头或多头蠕动排水泵，不包含
iCool 系列冷凝器规格：
| 样气流速范围 | 1-3 LPM (2.1- 6.4 SCFM) |
| 额定流量下的进气口条件 | 150°C (300°F) @ 12% H20, 2.5 LPM |
| 额定流量下的出气口露点 | 4°C (39.2°F) |
| 最大进气口温度 | 15 lbs – 6.8 kg |
| 最大进气口压力 | 200°C (392°F) SS, Durinert, 玻璃 138°C (280°F) Kynar |
| 环境温度范围 | 45 psig – 3 bar / 2250 mmHg |
| 电源 | 33-104°F – 0.6-40°C |
| 尺寸 | 18.5 x 21 x 26.7 cm 高x宽x深 7.25 x 8.25 x 10.5 in. |
| 重量 | 5 kg (11 lbs) |
iCool 冷凝器智能产品编号系统：
| 1 – AC 电源 |
|
| AC Powered Auto Sensing 90-240 VAC | A |
| 2 – 热交换器计算 |
|
| 1 active impinger, 1-2 lpm based on 12% water at inlet | 1 |
| 1 active impinger, 1 passive impinger, 3-4 lpm on 12% water at inlet | 0 |
| 3 – 热交换器类型 |
|
| 5″ Stainless Steel, EZ Clean Twist-Apart Impinger | ES |
| 5″ Glass Impinger, threaded with fittings | G |
| 5″ Kynar Impinger | K |
| 5″ Stainless-Durinert coated, EZ Clean Twist-Apart Impinger | ED |
iCool 系列推荐附件：
| ITEM # | 描述 |
| 3KPB-001 | Peristaltic pump, single head, 115 VAC, complete with enclosure |
| 3KPB-002 | Peristaltic pump, single head, 230 VAC, complete with enclosure |
| 3KPB-003 | Peristaltic pump, dual head, 115 VAC, complete with enclosure |
| 3KPB-004 | Peristaltic pump, dual head, 230 VAC, complete with enclosure |
iCool 系列冷凝器备件：
| ITEM # | 描述 |
| 3KPB-000 | Pump Peristaltic, No Heads |
| 2PBM-001 | Peristaltic pump, motor only, 115 VAC 60 Hz |
| 2PBM-002 | Peristaltic pump, motor only, 230 VAC 50 Hz |
| 2PBM-003 | Peristaltic pump, head only, standard |
| 2PBT-002PK | Peristaltic pump, tubing, norprene, size 17 (10 feet) |
| 3CXD-023 | Impinger, 5″ EZ-Clean twist-apart, SS Durinert+ coated |
| 3CXD-025 | Impinger, 5″ NJ, EZ-Clean twist-apart, SS Durinert+ coated |
| 3CXG-001 | Impinger, 5″ glass, threaded with fittings |
| 3CXK-001 | Impinger, 5″ Kynar |
| 3CXS-023 | Impinger, 5″ SS, EZ-Clean twist-apart |
| 3CXS-025 | Impinger, 5″ NJ, EZ-Clean twist-apart, SS |
| 102558 | Control board, single channel |
| 3CCB-050 | Power supply; 100W, 12VDC |
| 1TTC-025 | Thermister probe |
| 2FAN-004 | Fan, muffin, 4″ x 1-1/2″, 12VDC |
| 3KPE-004 | Peltier element kit, 40 mm, single TE |
| 3KCW-007 | Water Slip Sensor,Assembly, Wire leads only |
| 4C-NJ/K | NJ Thermocouple Retrofit; for 1 Impinger |
